ASCD 18-300 W2 AS Impact-tapping Set

Array
(
    [TermekNev1] => 
    [TermekNev11] => User set contains a cordless impact wrench/driver
    [TermekNev2] => 
    [TermekNev22] => ASCD 18-300 W2 AS Impact-tapping Set
    [TermekNev3] => 
    [TermekNev33] => 
    [ArlistaNev] => 
    [RovidLeiras] =>  User set contains a cordless impact wrench/driver ASCD 18-300 W2 AS Impact-tapping Set Cordless impact wrench/driver with 1/2" square head tool mounting. The user set includes 1/2" VARIO adapter, 5-part FEIN VARIO tapper set for through holes and circlip. Not including battery or charger.
    [Reszletek] => Array
        (
            [0] => For extreme precision work: The ASCD 18-300 W2 AS with electronic torque setting (6 levels) prevents screw heads from shearing off.
            [1] => Impact wrench/driver-compatible VARIO adapter turns the impact wrench/driver into a tapper, thereby adding a whole new tool to the range of applications.
            [2] => The 5-part FEIN VARIO tapper set covers sizes M8, M10, M12, M14, M16. 
            [3] => VARIO tapper for through holes.  Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛.
            [4] => Brushless FEIN PowerDrive motor with 30 % higher efficiency and long service life.
            [5] => 1/2" square for holding sockets.
            [6] => Metric screws up to M18 (8.8). 
            [7] => Compatible with Bosch Professional 18 V batteries (available since 2008) and AMPShare batteries.
            [8] => Maximum work progress with AMPShare 18V storage batteries: COOLPACK 1.0 technology ensures a longer storage battery life compared with batteries without COOLPACK technology and therefore makes longer operating periods possible. ECP protects the storage battery against overload, overheating and total discharge.
            [9] => Ideally equipped for every form of use. Mobile working with the L-BOXX system.
        )

    [SzallTartalom] => Array
        (
            [0] => 1 x ASCD 18-300 W2 AS (including belt clip, bit holder)
            [1] => 1 X 1/2" VARIO adapter
            [2] => 1 x 5-part VARIO tapper set (M8, M10, M12, M14, M16)
            [3] => 1 x locking spring
            [4] => 1 tool case (L-Boxx 136)
        )

)

User set contains a cordless impact wrench/driver ASCD 18-300 W2 AS Impact-tapping Set Cordless impact wrench/driver with 1/2" square head tool mounting. The user set includes 1/2" VARIO adapter, 5-part FEIN VARIO tapper set for through holes and circlip. Not including battery or charger.

Article number 71151065000

Details

For extreme precision work: The ASCD 18-300 W2 AS with electronic torque setting (6 levels) prevents screw heads from shearing off.
Impact wrench/driver-compatible VARIO adapter turns the impact wrench/driver into a tapper, thereby adding a whole new tool to the range of applications.
The 5-part FEIN VARIO tapper set covers sizes M8, M10, M12, M14, M16.
VARIO tapper for through holes. Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛.
Brushless FEIN PowerDrive motor with 30 % higher efficiency and long service life.
1/2" square for holding sockets.
Metric screws up to M18 (8.8).
Compatible with Bosch Professional 18 V batteries (available since 2008) and AMPShare batteries.
Maximum work progress with AMPShare 18V storage batteries: COOLPACK 1.0 technology ensures a longer storage battery life compared with batteries without COOLPACK technology and therefore makes longer operating periods possible. ECP protects the storage battery against overload, overheating and total discharge.
Ideally equipped for every form of use. Mobile working with the L-BOXX system.

Technical data

Battery voltage

Battery interface

18 V

Speed, no load

0 - 1700

Weight without storage battery

1.20

Tool Holder

1/2" Outer

Battery compatibility

Li-ion / ProCORE

Impacts

0 - 3400

Max. torque

290

Torque levels

Max. metric screw

M18

Wood screw Ř

8x300

Delivery contents

1 x ASCD 18-300 W2 AS (including belt clip, bit holder)
1 X 1/2" VARIO adapter
1 x 5-part VARIO tapper set (M8, M10, M12, M14, M16)
1 x locking spring
1 tool case (L-Boxx 136)

Accessories

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a

VARIO M8 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and

VARIO M12 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and

VARIO M14 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and

VARIO M16 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and

VARIO M18 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and

VARIO M20 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and

VARIO M22 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and

VARIO M24 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and

VARIO M27 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

5 parts, 1 each of M8 x 1.25 mm, M10 x 1.5 mm, M12 x 1.75 mm, M14 x 2.0 mm, M16 x 2.0 mm in cylindrical packaging. Long servi

VARIO tapper set for through holes 5 parts, 1 each of M8 x 1.25 mm, M10 x 1.5 mm, M12 x 1.75 mm, M14 x 2.0 mm, M16 x 2.0 mm in cylindrical packaging. Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers an

VARIO 6.8 mm twist drill (M8 thread) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers a

VARIO 8.5 mm twist drill (M10 thread) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers

VARIO 10.2 mm twist drill (M12 thread) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers an

VARIO 12 mm twist drill (M14 thread) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

4-part VARIO twist drill set with 6.8 mm, 8.5 mm, 10.2 mm and 12 mm sizes. Long service life, thanks to high material strength (64 HRC), s

VARIO twist drill set 4-part VARIO twist drill set with 6.8 mm, 8.5 mm, 10.2 mm and 12 mm sizes. Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and

VARIO 90° countersink 16.5 mm (M8) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and

VARIO 90° countersink 20.5 mm (M10) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and

VARIO 90° countersink 25.0 mm (M12) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and

VARIO 90° countersink 31.0 mm (M14) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.

Impact wrench/driver-compatible VARIO adapter turns the impact wrench/driver into a tapper, thereby adding a whole new tool to the range of a

VARIO 1/2 adapter Impact wrench/driver-compatible VARIO adapter turns the impact wrench/driver into a tapper, thereby adding a whole new tool to the range of applications. For all impact wrench/drivers with a 1/2" square head tool mounting. The FEIN VARIO consumable can be easily changed without the need for tools. Suited to all FEIN VARIO accessories twist drills, countersinks and tappers. Simple and mechanical drilling, countersinking and tapping up to M30. As of M18, we would recommend the FEIN VARIO 3/4" adapter with a larger tool for faster work progress. Unlike a drill/driver, the impact wrench/driver provides an easier and more powerful way of tapping. The adapter can be fitted with ease and secured for permanent use with the aid of a locking spring or circlip.

Short charge times thanks to the high charge current of 8 A, active air cooling and process-controlled charge management. User-frie

GAL 1880 CV AS rapid charger Short charge times thanks to the high charge current of 8 A, active air cooling and process-controlled charge management. User-friendly and space-saving thanks to fixture for coiling the mains cable. For all battery packs with AMPShare or Bosch Professional 18V battery interface. Charge times (80 % of max. capacity): GBA 18 V 2.0 Ah: 15 min., GBA 18 V 4.0 Ah: 25 min., GBA 18 V 5.0 Ah: 35 min., ProCORE 18 V 4.0 Ah: 32 min., ProCORE 18 V 8.0 Ah: 68 min., ProCORE 18 V 12.0 Ah: 113 min.

Short charge times thanks to the high charge current of 16 A, Power Boost charge mode, active air cooling and process-controlled c

GAL 18 V-160 AS rapid charger Short charge times thanks to the high charge current of 16 A, Power Boost charge mode, active air cooling and process-controlled charge management. With charge status indicator and fixture for mounting on wall. For all battery packs with AMPShare or Bosch Professional 18V battery interface. Charge times (80 % of max. capacity): GBA 18 V 2.0 Ah: 15 min., GBA 18 V 4.0 Ah: 16 min., GBA 18 V 5.0 Ah: 20 min., ProCORE 18 V 4.0 Ah: 32 min., ProCORE 18 V 8.0 Ah: 32 min., ProCORE 18 V 12.0 Ah: 36 min.

ProCORE Li-Ion battery with high-power cells, charge status indicator and Electronic Cell Protection (ECP). ECP protects a

ProCORE 18 V 4.0 Ah AS battery pack ProCORE Li-Ion battery with high-power cells, charge status indicator and Electronic Cell Protection (ECP). ECP protects against overload, overheating and total discharge. The COOLPACK 2.0 technology ensures a 135 % longer battery life compared with batteries without COOLPACK technology and therefore makes long operating periods possible. Compatible with all 18V cordless devices with AMPShare or Bosch Professional 18V battery interface.

ProCORE Li-Ion battery with high-power cells, charge status indicator and Electronic Cell Protection (ECP). ECP protects a

ProCORE 18 V 8.0 Ah AS battery pack ProCORE Li-Ion battery with high-power cells, charge status indicator and Electronic Cell Protection (ECP). ECP protects against overload, overheating and total discharge. The COOLPACK 2.0 technology ensures a 135 % longer battery life compared with batteries without COOLPACK technology and therefore makes long operating periods possible. Compatible with all 18V cordless devices with AMPShare or Bosch Professional 18V battery interface.

ProCORE Li-Ion battery with high-power cells, charge status indicator and Electronic Cell Protection (ECP). ECP protects

ProCORE 18 V 12.0 Ah AS battery pack ProCORE Li-Ion battery with high-power cells, charge status indicator and Electronic Cell Protection (ECP). ECP protects against overload, overheating and total discharge. The COOLPACK 2.0 technology ensures a 135 % longer battery life compared with batteries without COOLPACK technology and therefore makes long operating periods possible. Compatible with all 18V cordless devices with AMPShare or Bosch Professional 18V battery interface.

Li-Ion battery with charge status indicator and Electronic Cell Protection (ECP). ECP protects against overload, overheating a

GBA 18 V 4.0 Ah AS battery pack Li-Ion battery with charge status indicator and Electronic Cell Protection (ECP). ECP protects against overload, overheating and total discharge. The COOLPACK 1.0 technology ensures a longer battery life compared with batteries without COOLPACK technology and therefore makes long operating periods possible. Compatible with all 18V cordless devices with AMPShare or Bosch Professional 18V battery interface.

Li-Ion battery with charge status indicator and Electronic Cell Protection (ECP). ECP protects against overload, overheating a

GBA 18 V 5.0 Ah AS battery pack Li-Ion battery with charge status indicator and Electronic Cell Protection (ECP). ECP protects against overload, overheating and total discharge. The COOLPACK 1.0 technology ensures a longer battery life compared with batteries without COOLPACK technology and therefore makes long operating periods possible. Compatible with all 18V cordless devices with AMPShare or Bosch Professional 18V battery interface.

Practical tool with high magnetic force for quick and easy collection of magnetic metal swarf.

Magbrush Practical tool with high magnetic force for quick and easy collection of magnetic metal swarf.