Array
(
[TermekNev1] =>
[TermekNev11] => Endurance magnetic core drill for up to 36 mm
[TermekNev2] =>
[TermekNev22] => KBE 36 QW MAGSPEED
[TermekNev3] =>
[TermekNev33] =>
[ArlistaNev] =>
[RovidLeiras] => Endurance magnetic core drill for up to 36 mm KBE 36 QW MAGSPEED Small and lightweight single-speed endurance magnetic core drill offering unique performance and service life even under the most challenging conditions in the workshop and on the construction site.
[Reszletek] => Array
(
[0] => Twice the productivity combined with the perfect result: drilling times are halved, the work process is sped up. Thanks to rapid work progress, you can drill up to 60 holes rather than the 30 that used to be possible in the same time.
[1] => Outstanding cutting performance that has never been seen before thanks to speed and torque curve with cutting speeds of up to 70 m/min, ideal for HM ULTRA and HM ULTRA SPEED core drill bits.
[2] => Unique durability for up to 240 000 holes thanks to the extremely low-wear machine concept with brushless 1 600 W high-power motor and internal drill motor cable routing.
[3] => Good accessibility in cramped operating situations.
[4] => Convenient magnetic holding force display helps the user to reliably position the tool.
[5] => Tilt sensor stops the drill motor when the tool slips or tilts.
[6] => Integrated coolant tank delivers long core drill bit lives.
[7] => Feed handwheel can be moved from one side to the other without any tools.
[8] => Personal safety switch.
)
[SzallTartalom] => Array
(
[0] => 1 magnetic core drill
[1] => 1 coolant tank
[2] => 1 lashing strap
[3] => 1 centring pin 100 mm
[4] => 1 contact guard
[5] => 1 case
)
)
Endurance magnetic core drill for up to 36 mm KBE 36 QW MAGSPEED Small and lightweight single-speed endurance magnetic core drill offering unique performance and service life even under the most challenging conditions in the workshop and on the construction site.
Article number 72732861000
Details
Twice the productivity combined with the perfect result: drilling times are halved, the work process is sped up. Thanks to rapid work progress, you can drill up to 60 holes rather than the 30 that used to be possible in the same time.
Outstanding cutting performance that has never been seen before thanks to speed and torque curve with cutting speeds of up to 70 m/min, ideal for HM ULTRA and HM ULTRA SPEED core drill bits.
Unique durability for up to 240 000 holes thanks to the extremely low-wear machine concept with brushless 1 600 W high-power motor and internal drill motor cable routing.
Good accessibility in cramped operating situations.
Convenient magnetic holding force display helps the user to reliably position the tool.
Tilt sensor stops the drill motor when the tool slips or tilts.
Integrated coolant tank delivers long core drill bit lives.
Feed handwheel can be moved from one side to the other without any tools.
Best of core bits 3/4 in Weldon Very long service life and outstanding cutting performance. Metric dimensions, cutting depth 35 mm. Set version, consisting of 6 core bits with diameters of 12, 14, 16, 18, 20 and 22 mm (cutting depth 35 mm) and 2 centring pins (100 mm) in plastic case.
Accessory set for best of core drilling carbide coated 3/4 Weldon TiAlSiN surface coating for unique cutting performance and maximum work progress with an extremely long service life. Metric dimensions, cutting depth 35 mm. Set model, consisting of 6 core drill bits with diameters of 2x 14 / 16 / 18 / 20 / 22 mm (cutting depth 35 mm) and 2 centring pins (100 mm) in plastic case.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
HSS Nova 25 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1250 mm with 25 mm cutting depth.
Best of core bits 3/4 in Weldon Industrial standard. Metric dimensions, cutting depth 25 mm. Set version, consisting of 6 core bits with diameters of 12, 14, 16, 18, 20 and 22 mm (cutting depth 25 mm) and 2 centring pins (82 mm) in plastic case.
Best of core bits 3/4 in Weldon Industrial standard. Metric dimensions, cutting depth 25 mm. Set version, consisting of 4 core bits, 2 x 14 mm diameter, 2 x 18 mm diameter, (cutting depth 25 mm) and 1 centring pin (80 mm) in plastic case.
Best of core bits 3/4 in Weldon Industrial standard. Metric dimensions, cutting depth 50 mm. Set version, consisting of 6 core bits with diameters of 12, 14, 16, 18, 20 and 22 mm (cutting depth 50 mm) and 2 centring pins (100 mm) in plastic case.
Best of core bits 3/4 in Weldon Industrial standard. Metric dimensions, cutting depth 50 mm. Set version, consisting of 4 core bits, 2x 14 mm diameter, 2x 18 mm diameter, (cutting depth 50 mm) and 1 centring pin (100 mm) in plastic case.
Tapper set for through holes Comprising 1 x M10 threading drill in accordance with DIN 352 / ISO 13 with 3/4 Weldon adapter, 1 x HSS twist drill, 8.5 mm in diameter, with 3/4 Weldon fitting and 1 x HSS 90° countersink bit, 16.5 mm in diameter, with 3/4 Weldon adapter and 1 x hexagon socket wrench in a handy plastic storage box.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 50 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 50 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Available in ⌀ 1265 mm with 50 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 35 core bit with 3/4 in Weldon holder The extra-durable HM ULTRA 35 is made for continuous use: carbide-tipped, extremely wear-resistant and heat-resistant up to 800°C. Ideal for serial drilling. Available in ⌀ 1260 mm with 35 mm cutting depth.
TCT Ultra 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1865 mm with 75 mm cutting depth.
TCT Ultra 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1865 mm with 75 mm cutting depth.
TCT Ultra 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1865 mm with 75 mm cutting depth.
TCT Ultra 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1865 mm with 75 mm cutting depth.
TCT Ultra 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1865 mm with 75 mm cutting depth.
TCT Ultra 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1865 mm with 75 mm cutting depth.
TCT Ultra 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1865 mm with 75 mm cutting depth.
TCT Ultra 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1865 mm with 75 mm cutting depth.
TCT Ultra 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1865 mm with 75 mm cutting depth.
TCT Ultra 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1865 mm with 75 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1860 mm with 75 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1860 mm with 75 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1860 mm with 75 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1860 mm with 75 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1860 mm with 75 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1860 mm with 75 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1860 mm with 75 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1860 mm with 75 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1860 mm with 75 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1860 mm with 75 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1860 mm with 75 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 50 core bit with 3/4 in Weldon holder Attractive for assembly work, working at height and durable in S235 structural steel. Can be resharpened multiple times, making it extremely durable and economical. Available in ⌀ 1260 mm with 50 mm cutting depth.
HSS Nova 75 core bit with 3/4 in Weldon holder For drilling depths up to 75 mm ideal for existing structures or for overcoming height differences. Carbide-tipped, durable and efficient. Available in ⌀ 1860 mm with 75 mm cutting depth.
HSS Dura 25 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 12-60 mm with 25 mm cutting depth.
HSS Dura 50 core bit with 3/4 in Weldon holder Extremely shock and impact resistant for demanding use in steel and stainless steel. TiN coating ensures high wear resistance and long service life in steel construction. Available in ⌀ 1260 mm with 50 mm cutting depth.
Vacuum plate For non-magnetic materials and structured bases (chequered sheet, bulb plate etc.). Must be used in conjunction with vacuum pump. Maximum hole diameter 65 mm. Vacuum plate 396 x 200 x 95 mm
Universal magnetic core drill for up to 35 mm KBU 35 QW Small and powerful single-speed universal magnetic core drill with clockwise/anti-clockwise operation and maximum functionality for flexible working on the construction site.
Universal magnetic core drill for up to 35 mm KBU 35-2 QW Small and powerful 2-speed universal magnetic core drill with clockwise/anti-clockwise operation and high speed for efficient twist drilling on the construction site.
Universal magnetic core drill for up to 35 mm KBU 35 MQW Small and powerful single-speed universal magnetic core drill with clockwise/anti-clockwise operation, MT2 tool mounting and maximum functionality for flexible working on the construction site.
Universal magnetic core drill for up to 35 mm KBU 35 PQW Small and powerful single-speed universal magnetic core drill with clockwise/anti-clockwise operation, permanent magnet and maximum functionality for very safe and flexible working on the construction site.
+36 28 503 100 
Details