Array
(
[TermekNev1] =>
[TermekNev11] => User set contains a cordless impact wrench/driver
[TermekNev2] =>
[TermekNev22] => ASCD 18-300 W2 AS Ready-to-use Set
[TermekNev3] =>
[TermekNev33] =>
[ArlistaNev] =>
[RovidLeiras] => User set contains a cordless impact wrench/driver ASCD 18-300 W2 AS Ready-to-use Set Cordless impact wrench/driver with 1/2" square head tool mounting. The user set includes 3-part set of impact sockets (17 / 19 / 21 mm) and circlip. Without battery or charger.
[Reszletek] => Array
(
[0] => For extreme precision work: The ASCD 18-300 W2 AS with electronic torque setting (6 levels) prevents screw heads from shearing off.
[1] => Be ready to go instantly with tool and appropriate accessories for driving metric screws.
[2] => 3-part set of impact sockets with appropriate circlip for widths across flats of 17 mm, 19 mm and 21 mm.
[3] => VARIO 1/2" adapter, available as an extra and developed by FEIN, suitable for all VARIO accessories for simple and mechanical drilling, countersinking, tapping, recutting and cleaning of through holes up to a maximum of M18. Turns the impact wrench/driver into a tapper, thereby adding a whole new tool to the range of applications.
[4] => Brushless FEIN PowerDrive motor with 30 % higher efficiency and long service life.
[5] => 1/2" square for holding sockets.
[6] => Metric screws up to M18 (8.8).
[7] => 10% more torque in reverse running to loosen screws which are extremely tight.
[8] => Robust solid metal impact gear.
[9] => Contact guard on gearbox head.
[10] => Up to 600 screw connections (M18) with one battery charge (ProCORE 4 Ah).
[11] => Bit and belt holder on the side for ergonomic and flexible handling.
[12] => Compatible with Bosch Professional 18 V batteries (available since 2008) and AMPShare batteries.
[13] => Maximum work progress with AMPShare 18V storage batteries: COOLPACK 1.0 technology ensures a longer storage battery life compared with batteries without COOLPACK technology and therefore makes longer operating periods possible. ECP protects the storage battery against overload, overheating and total discharge.
[14] => Ideally equipped for every form of use. Mobile working with the L-BOXX system.
)
[SzallTartalom] => Array
(
[0] => 1 x ASCD 18-300 W2 AS (including belt clip, bit holder)
[1] => 1 x set of impact sockets
[2] => 1 x locking spring
[3] => 1 tool case (L-Boxx 136)
)
)
User set contains a cordless impact wrench/driver ASCD 18-300 W2 AS Ready-to-use Set Cordless impact wrench/driver with 1/2" square head tool mounting. The user set includes 3-part set of impact sockets (17 / 19 / 21 mm) and circlip. Without battery or charger.
Article number 71151063000
Details
For extreme precision work: The ASCD 18-300 W2 AS with electronic torque setting (6 levels) prevents screw heads from shearing off.
Be ready to go instantly with tool and appropriate accessories for driving metric screws.
3-part set of impact sockets with appropriate circlip for widths across flats of 17 mm, 19 mm and 21 mm.
VARIO 1/2" adapter, available as an extra and developed by FEIN, suitable for all VARIO accessories for simple and mechanical drilling, countersinking, tapping, recutting and cleaning of through holes up to a maximum of M18. Turns the impact wrench/driver into a tapper, thereby adding a whole new tool to the range of applications.
Brushless FEIN PowerDrive motor with 30 % higher efficiency and long service life.
1/2" square for holding sockets.
Metric screws up to M18 (8.8).
10% more torque in reverse running to loosen screws which are extremely tight.
Robust solid metal impact gear.
Contact guard on gearbox head.
Up to 600 screw connections (M18) with one battery charge (ProCORE 4 Ah).
Bit and belt holder on the side for ergonomic and flexible handling.
Compatible with Bosch Professional 18 V batteries (available since 2008) and AMPShare batteries.
Maximum work progress with AMPShare 18V storage batteries: COOLPACK 1.0 technology ensures a longer storage battery life compared with batteries without COOLPACK technology and therefore makes longer operating periods possible. ECP protects the storage battery against overload, overheating and total discharge.
Ideally equipped for every form of use. Mobile working with the L-BOXX system.
Technical data
Battery voltage
18
Battery interface
18 V
Speed, no load
0 - 1700
Weight without storage battery
1.20
Tool Holder
1/2" Outer
Battery compatibility
Li-ion / ProCORE
Impacts
0 - 3400
Max. torque
290
Torque levels
6
Max. metric screw
M18
Wood screw Ř
8 x 300
Delivery contents
1 x ASCD 18-300 W2 AS (including belt clip, bit holder)
VARIO M8 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO M12 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO M14 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO M16 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO M18 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO M20 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO M22 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO M24 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO M27 tapper for through holes Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO tapper set for through holes 5 parts, 1 each of M8 x 1.25 mm, M10 x 1.5 mm, M12 x 1.75 mm, M14 x 2.0 mm, M16 x 2.0 mm in cylindrical packaging. Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO 6.8 mm twist drill (M8 thread) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO 8.5 mm twist drill (M10 thread) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO 10.2 mm twist drill (M12 thread) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO 12 mm twist drill (M14 thread) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO twist drill set 4-part VARIO twist drill set with 6.8 mm, 8.5 mm, 10.2 mm and 12 mm sizes. Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO 90° countersink 16.5 mm (M8) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO 90° countersink 20.5 mm (M10) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO 90° countersink 25.0 mm (M12) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO 90° countersink 31.0 mm (M14) Long service life, thanks to high material strength (64 HRC), special cutting geometries suited to impact wrench/drivers and a TiAlN (titanium-aluminium-nitride) coating. The bits experience low levels of wear and friction as well as being heat-resistant to 800 °C. Thanks to the high speeds and number of blows, they can therefore be used in steel up to 900 N/mm˛. Perfectly suited to the following materials: non-alloyed and alloyed steels up to 900 N/mm˛, aluminium, brass.
VARIO 1/2 adapter Impact wrench/driver-compatible VARIO adapter turns the impact wrench/driver into a tapper, thereby adding a whole new tool to the range of applications. For all impact wrench/drivers with a 1/2" square head tool mounting. The FEIN VARIO consumable can be easily changed without the need for tools. Suited to all FEIN VARIO accessories twist drills, countersinks and tappers. Simple and mechanical drilling, countersinking and tapping up to M30. As of M18, we would recommend the FEIN VARIO 3/4" adapter with a larger tool for faster work progress. Unlike a drill/driver, the impact wrench/driver provides an easier and more powerful way of tapping. The adapter can be fitted with ease and secured for permanent use with the aid of a locking spring or circlip.
GAL 1880 CV AS rapid charger Short charge times thanks to the high charge current of 8 A, active air cooling and process-controlled charge management. User-friendly and space-saving thanks to fixture for coiling the mains cable. For all battery packs with AMPShare or Bosch Professional 18V battery interface. Charge times (80 % of max. capacity): GBA 18 V 2.0 Ah: 15 min., GBA 18 V 4.0 Ah: 25 min., GBA 18 V 5.0 Ah: 35 min., ProCORE 18 V 4.0 Ah: 32 min., ProCORE 18 V 8.0 Ah: 68 min., ProCORE 18 V 12.0 Ah: 113 min.
GAL 18 V-160 AS rapid charger Short charge times thanks to the high charge current of 16 A, Power Boost charge mode, active air cooling and process-controlled charge management. With charge status indicator and fixture for mounting on wall. For all battery packs with AMPShare or Bosch Professional 18V battery interface. Charge times (80 % of max. capacity): GBA 18 V 2.0 Ah: 15 min., GBA 18 V 4.0 Ah: 16 min., GBA 18 V 5.0 Ah: 20 min., ProCORE 18 V 4.0 Ah: 32 min., ProCORE 18 V 8.0 Ah: 32 min., ProCORE 18 V 12.0 Ah: 36 min.
ProCORE 18 V 4.0 Ah AS battery pack ProCORE Li-Ion battery with high-power cells, charge status indicator and Electronic Cell Protection (ECP). ECP protects against overload, overheating and total discharge. The COOLPACK 2.0 technology ensures a 135 % longer battery life compared with batteries without COOLPACK technology and therefore makes long operating periods possible. Compatible with all 18V cordless devices with AMPShare or Bosch Professional 18V battery interface.
ProCORE 18 V 8.0 Ah AS battery pack ProCORE Li-Ion battery with high-power cells, charge status indicator and Electronic Cell Protection (ECP). ECP protects against overload, overheating and total discharge. The COOLPACK 2.0 technology ensures a 135 % longer battery life compared with batteries without COOLPACK technology and therefore makes long operating periods possible. Compatible with all 18V cordless devices with AMPShare or Bosch Professional 18V battery interface.
ProCORE 18 V 12.0 Ah AS battery pack ProCORE Li-Ion battery with high-power cells, charge status indicator and Electronic Cell Protection (ECP). ECP protects against overload, overheating and total discharge. The COOLPACK 2.0 technology ensures a 135 % longer battery life compared with batteries without COOLPACK technology and therefore makes long operating periods possible. Compatible with all 18V cordless devices with AMPShare or Bosch Professional 18V battery interface.
GBA 18 V 4.0 Ah AS battery pack Li-Ion battery with charge status indicator and Electronic Cell Protection (ECP). ECP protects against overload, overheating and total discharge. The COOLPACK 1.0 technology ensures a longer battery life compared with batteries without COOLPACK technology and therefore makes long operating periods possible. Compatible with all 18V cordless devices with AMPShare or Bosch Professional 18V battery interface.
GBA 18 V 5.0 Ah AS battery pack Li-Ion battery with charge status indicator and Electronic Cell Protection (ECP). ECP protects against overload, overheating and total discharge. The COOLPACK 1.0 technology ensures a longer battery life compared with batteries without COOLPACK technology and therefore makes long operating periods possible. Compatible with all 18V cordless devices with AMPShare or Bosch Professional 18V battery interface.
+36 28 503 100 
Details