Array
(
    [TermekNev1] => Cordless compact magnetic core drill, up to 36 mm
    [TermekNev11] => 
    [TermekNev2] => 
    [TermekNev22] => AKBC 36 MAGFORCE
    [TermekNev3] => 
    [TermekNev33] => 
    [ArlistaNev] => 
    [RovidLeiras] => Extremely small and lightweight 1-speed cordless compact magnetic core drill with minimal dimensions for use in confined spaces in the workshop and on the construction site.
    [Reszletek] => Array
        (
            [0] => Compact: With a height of only 169 mm, a length of 356 mm and a weight of 8.5 kg, it is ideal for confined working areas – even overhead and vertically.
            [1] => Productive: Up to 25% faster work progress and longer battery life. With an 18 V ProCORE 8.0 Ah battery, up to 35 holes can be drilled per battery charge (HM ULTRA ⌀ 18 mm, S235 12 mm).
            [2] => Powerful: High-performance brushless motor with electronic speed control – ideal for core, spiral, thread and countersink drilling.
            [3] => Very safe: Permanent magnet with 8,000 N holding force, LED display for magnetic holding force and drilling pressure, and tilt sensor with automatic motor stop.
            [4] => Maintenance-free spindle feed ensures high concentricity.
            [5] => Fine adjustment of the permanent magnet for precise alignment at the drilling point.
            [6] => Can be used in thin sheet metal from 6 mm material thickness with reduced magnetic holding force.
            [7] => High gearbox positioning for optimum view of the drilling point.
            [8] => Drive shaft combines a 1/2-inch square drive and an 8 mm hex socket.
            [9] => 1/2 in adapter with SW19 hexagon for activating the magnet in tight or deep installation positions with open-end, box-end or socket wrenches.
            [10] => Compatible with Bosch Professional 18 V batteries since 2008 as well as with AMPShare and EXPERT batteries (8.0 Ah).
        )

    [SzallTartalom] => Array
        (
            [0] => 1 cordless magnetic core drill
            [1] => 1 x 1/2” ratchet
            [2] => 1 adapter 1/2 in with SW19 hexagon
            [3] => 1 x coolant pump
            [4] => 1 lashing strap
            [5] => 1 chip hook
            [6] => 1 x 82 mm centring pin
            [7] => 1 Chip grid
            [8] => 1 additional handle
            [9] => 1 x 5 mm hexagon socket wrench
            [10] => 1 x 5 mm hexagon socket wrench with T-handle
            [11] => 1 plastic tool case (L-BOXX 238)
        )

)